EasyManua.ls Logo

Fujitsu PRIMERGY RX2520 M4 - CMOS Battery; Replacing the CMOS Battery; Preliminary Steps

Fujitsu PRIMERGY RX2520 M4
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX2520 M4
Upgrade and Maintenance Manual 349
System board and components
15.2 CMOS battery
15.2.1 Replacing the CMOS battery
Safety notes
V CAUTION!
The CMOS battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For more safety information, see section "Environmental protection"
in the operating manual of your server.
Ensure to insert the CMOS battery with the positive pole facing
up!
15.2.1.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the power cord" on page 49
Ê "Getting access to the component" on page 50
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less; recommended: tooth pick

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2520 M4

Related product manuals