358 Upgrade and Maintenance Manual
RX2520 M4
System board and components
Figure 252: Removing the TPM spacer
Ê Using a pair of flat nose pliers, press together the hooks on the TPM spacer
(see arrows) and remove it from the system board.
I If the TPM is to be replaced, the TPM spacer may remain on the
system board.
Ê Install the system board, see section "Installing the new system board" on
page 384.
15.3.2.3 Concluding steps
Ê "Installing the crossbar" on page 66
Ê "Installing the fan holder" on page 64
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
To Next Page
Loading...
Need help?
General