Fujitsu PRIMERGY RX2520 M4

RX2520 M4 Upgrade and Maintenance Manual 117
Power supply unit (PSU)
6.3.3.2 Removing the power distribution board
Ê Remove the PSU from bay 2, see section "Removing a PSU" on page 104.
Ê Remove the power distribution board, see section "Removing the power
distribution board" on page 115.
6.3.3.3 Installing the power distribution board
Ê Install the power distribution board, see section "Installing the power
distribution board" on page 112.
Ê Install the PSU into bay 2, see section "Installing a PSU" on page 102.
6.3.3.4 Concluding steps
Ê "Installing the crossbar" on page 66
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
Ê "Resuming BitLocker functionality" on page 89