RX2520 M4
Upgrade and Maintenance Manual 309
12.5.3 Replacing a RDX drive
12.5.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or ODD before removing it from the server.
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 48
Ê "Disconnecting the power cord" on page 49
Ê "Getting access to the component" on page 50
Ê "Removing the fan holder" on page 63
12.5.3.2 Removing the defective RDX drive
Ê Remove the RDX drive, see section"Removing the RDX drive" on page 306.
12.5.3.3 Installing the new RDX drive
Ê Install the RDX drive, see section "Installing the RDX drive" on page 303.
12.5.3.4 Concluding steps
Ê "Installing the front panel cage" on page 319
Ê "Installing the fan holder" on page 64
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Ê "Switching on the server" on page 60
Ê "Resuming BitLocker functionality" on page 89
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
Need help?
General