RX2520 M4
Upgrade and Maintenance Manual 245
10.4 Replacing memory modules
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 48.
Ê "Disconnecting the power cord" on page 49
Ê "Getting access to the component" on page 50
Ê "Removing the air duct" on page 61
Ê "Locating the defective component" on page 47
10.4.2 Removing a defective memory module
Ê Remove the memory module, see section "Removing a memory module" on
page 244.
10.4.3 Installing a new memory module
Ê Install the memory module, see section "Installing a memory module" on
page 242.
10.4.4 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 55
Ê "Connecting the power cord" on page 59
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less