RX2520 M4
Upgrade and Maintenance Manual 57
Basic hardware procedures
Ê If required, install the rack mounting bracket and rack system into the rack,
see the Rack Mounting Kit - RMK-F1/F2 DROP-IN Quick Release Lever
(QRL)" Mounting Instructions.
I The printed poster is contained in the rack mounting kit.
Figure 7: Mounting the server onto the rack rails
Ê Fully extend the rack rails until they lock in place (1).
I The rack rails must click into place so that they can no longer be
moved.
Ê At a slight angle, lower the server onto the rear mounting point on the rack
rails (2).
Ê Fold down the server (3). Ensure that all six rack mounting bolts are properly
seated in the mounting points on the rack rails (4) and that the locking bars
engage (5).
To Next Page
Loading...
Need help?
General