140 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Basic hardware procedures
4.14 Concluding software tasks
Ê Perform the following software tasks to put the server back in operation:
– "Resetting the boot retry counter" on page 156
– "Verifying the system time settings" on page 161
– "Viewing and clearing the System Event Log (SEL)" on page 162
– "Updating the NIC configuration file in a Linux environment" on
page 163
– "Enabling BitLocker functionality" on page 165
– "Performing a RAID array rebuild" on page 166
– "Looking up changed MAC / WWN addresses" on page 166
To Next Page
Loading...
