TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 395
Fans
8.3.1.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the side / top cover as described in section "Mounting the top cover"
on page 115 (rack server) or "Mounting the side cover" on page 122 (tower
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page 132.
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 130.
Ê Reconnect all external cables to the server rear.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section "Connecting the server to
the mains" on page 133.
Ê Switch on the server.
Ê Perform a fan test as described in section "Performing a fan test after
replacing a defective fan" on page 157.
To Next Page
Loading...
