Fujitsu PRIMERGY TX300 S7 - SAS Backup Drive (LTO5)

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 673
Accessible drives
Ê Run the SAS and power cables through the cable clamps (see arrows) as
shown.
I The power connector on SAS / power cable Y3969-V401 (X) remains
unused.
12.2.5.4 SAS backup drive (LTO5)
Ê Connect the SAS and power cables according to your configuration as
shown in the tables above.
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan
SAS Backup Drive
SAS / Power cable
Y3969-V401
7
SAS backup drive
(P1, 22-pin
connector)
System board
connector SAS 1-4
(P2, 36-pin Mini SAS
connector)
1
1
Requires installed Onboard SAS enabling key (see section "Installing the onboard SAS
enabling key" on page 848)
16.2.1
System board
connector PWR
HDD / ODD
(P1, 4-pin connector)
16.2.3
16.2.15