EasyManua.ls Logo

Fujitsu PRIMERGY TX300 S7 - Concluding Steps; Installing the 2 X 3.5-Inch HDD Extension Box

Fujitsu PRIMERGY TX300 S7
962 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 737
Accessible drives
12.6.3.8 Installing the 2x 3.5-inch HDD extension box
Ê Reinstall the 2x 3.5-inch HDD extension box as described in section
"Installing the 2x 3.5-inch HDD extension box" on page 315.
12.6.3.9 Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section "Installing the system
fan holder" on page 390.
Ê Reinstall the air duct as described in section "Installing the system air duct"
on page 102.
Ê Close the side / top cover as described in section "Mounting the top cover"
on page 115 (rack server) or "Mounting the side cover" on page 122 (tower
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page 132.
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 130.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section "Connecting the server to
the mains" on page 133.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX300 S7

Related product manuals