TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 849
System board and components
Ê Open the side / top cover as described in section "Removing the top cover"
on page 79 (rack server) or "Removing the side cover" on page 88 (tower
server).
Ê Remove the air duct as described in section "Removing the system air duct"
on page 100.
14.4.1.3 Installing the onboard SAS enabling key
Figure 588: Onboard SAS enabling key (A3C40138194 / SRT:PN-EP1-1000-11-05051)
Figure 589: Onboard SAS enabling key mounting location
Ê Locate the onboard SAS enabling key mounting location on the system
board.
To Next Page
Loading...
