Fujitsu PRIMERGY TX300 S7 - Documents You Need at Hand

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 47
Before you start
2.4 Documents you need at hand
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I – Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com under Industry standard servers or from the
ServerView Suite DVD 2 supplied with your PRIMERGY server.
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
Document Description
"Quick Start Hardware -
PRIMERGY TX300 S7" leaflet
Quick installation poster for initial operation,
available only in printed form
"Quick Start Hardware -
PRIMERGY RX350 S7" leaflet
"PRIMERGY ServerView Suite -
Overview & Installation" DVD
booklet
DVD booklet on initial software
configuration included as a printed copy
with the ServerView Suite
"Safety notes and regulations"
manual
" 安全上のご注意 " for the
Japanese market
Important safety information, available from
the ServerView Suite DVD 2, online, or as a
printed copy
"PRIMERGY
TX300 S7 / RX350 S7 Server"
Operating Manual
available from the ServerView Suite DVD 2
or online
"D2949 BIOS Setup Utility for
PRIMERGY
TX300 S7 / RX350 S7"
Reference Manual
Information on configurable BIOS options
and parameters, available from the
ServerView Suite DVD 2 or online
System board and service labels
Labels inside the side / top server cover
outlining connectors, indicators and basic
maintenance tasks
Table 3: Documentation you need at hand