TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 39
2 Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter "Important information" on
page 51.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section "Documents you need at hand" on
page 47. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 41.
Ê Ensure that all required tools are available according to section "Tools you
need at hand" on page 45.
Installing optional components
The "PRIMERGY TX300 S7 / RX350 S7 Server Operating manual" gives an
introduction to server features and provides an overview of available hardware
options.
Use the Fujitsu ServerView Suite management software to prepare hardware
expansions. ServerView Suite documentation is available online at
http://manuals.ts.fujitsu.com (http://jp.fujitsu.com/platform/server/primergy/manual/
for the Japanese market) or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server. Please refer to the following ServerView Suite topics:
– Operation
– Virtualization
– Maintenance
I For the latest information on hardware options, refer to your server’s
hardware configurator available online at the following address:
for the EMEA market:
http://www.fujitsu.com/fts/products/computing/servers/primergy/tower/tx300/
http://www.fujitsu.com/fts/products/computing/servers/primergy/rack/rx350/
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
To Next Page
Loading...
