Fujitsu PRIMERGY TX300 S7 - Removing the Front Panel Module; Removing Front Panel Cables from the System Board

762 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Front panel and external connectors
13.1.3 Removing the front panel module
13.1.3.1 Removing front panel cables from the system board
Figure 528: Disconnecting the front LAN board
Ê If applicable, disconnect the front LAN board from the system board:
Ê Press in on the locking latch on the front LAN board holder (1, see close-
up).
Ê While holding the locking latch pressed, pull the front LAN board out of
its socket (2).