Fujitsu PRIMERGY TX300 S7 - Installing the 8 X 2.5-Inch HDD Extension Box

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 353
Hard disk drives / solid state drives
7.4.8.4 Installing the 8x 2.5-inch HDD extension box
Figure 219: Checking mounting bracket positions
Ê Using a screw driver, bend the mounting brackets of the middle installation
bay outwards (see close-up):
Ê Bend up the upper two mounting brackets (see blue arrows).
Ê Bend down the lower two mounting brackets (see orange arrows).