TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 325
Hard disk drives / solid state drives
7.4.3.4 Installing accessible drive dummy covers
Installing accessible drive filler covers
Figure 202: Installing an accessible drive filler cover
Ê Hold the accessible drive filler cover (C26361-K644-C933) by its two handle
recesses and insert it into the empty installation bays with the punched-out
arrow symbol facing up (see close-up).
V CAUTION!
Always replace filler covers into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
To Next Page
Loading...
