700 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Accessible drives
Figure 489: Routing cables
Ê Run SATA cable T26139-Y3958-V205 along the drive bays and through the
cable clamp on the server floor as shown.
Ê Run the SATA cable through the cable guide.
12.5.1.8 Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section "Installing the system
fan holder" on page 390.
Ê Reinstall the air duct as described in section "Installing the system air duct"
on page 102.
Ê If applicable, close the front cover and reinstall the ID card as described in
section "Closing the server" on page 112.
To Next Page
Loading...
