Fujitsu PRIMERGY TX300 S7 - Reassembling the Front Panel Module; Reinstalling the Front Panel Module

782 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Front panel and external connectors
Figure 549: Mounting the front LAN connector (B)
Ê Carefully snap the front LAN cable connector into the mounting bracket (see
close-up).
13.2.1.6 Reassembling the front panel module
Ê Mount the front panel module cover on the front panel frame as described in
section "Mounting the front panel module cover" on page 769.
13.2.1.7 Reinstalling the front panel module
Ê Reinstall the front panel module as described in section "Installing the front
panel module" on page 771.