Fujitsu PRIMERGY TX300 S7 - Reinstalling the TPM Board; Removing the TPM Board

846 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
System board and components
Ê Remove the system fan holder as described in section "Removing the
system fan holder" on page 389.
14.3.3.3 Removing the TPM board
Ê Remove the TPM board as described in section "Removing the TPM board"
on page 839.
Ê Leave the TPM spacer on the system board when removing the defective
TPM board.
14.3.3.4 Reinstalling the TPM board
Figure 587: TPM spacer
Ê The TPM spacer is already present on the system board.
Ê Reinstall the TPM board as described in section "Installing the TPM board"
on page 833.