TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 643
Processors
Two different processor heat sinks are available for the TX300 S7 / RX350 S7
servers:
11.5.3.1 Preparing the heat sink and processor
When installing a new heat sink
Figure 440: Removing the protective heat sink cover
Ê Remove the protective cover from the heat sink.
V CAUTION!
Ensure not to touch the thermal paste on the bottom of the heat sink.
Standard heat sink V26898-B977-V1
for CPUs with a TDP
of up to 130 W
High performance heat sink V26898-B977-V3
for CPUs with a TDP
of 135 W and up
To Next Page
Loading...
