Fujitsu PRIMERGY TX300 S7 - Customer Self Service (CSS) Indicator

66 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Basic hardware procedures
Ê For further diagnostics, proceed as follows:
– Hardware errors:
Check the System Event Log (SEL) as described in section "Viewing the
SEL" on page 162.
– Software / agent related errors:
Check the ServerView System Monitor, available on Windows or Linux
based servers with ServerView agents installed.
I For further information, please refer to the "ServerView System
Monitor" user guide, available online at http://manuals.ts.fujitsu.com
or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server
4.1.2.2 Customer Self Service (CSS) indicator
Figure 5: CSS error indicator in front panel
Ê Check the CSS indicator on the front panel or connector panel of the server:
Indicator Status Description
CSS indicator
off no critical event (CSS component)
yellow on prefailure detected (CSS component)
yellow
flashing
CSS component failure