Fujitsu PRIMERGY TX300 S7 - Removing the LSD Module from the Extension Box

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 731
Accessible drives
12.6.2.5 Removing the LSD module from the extension box
Figure 513: Removing the LSD module
Ê From the rear side of the extension box, press in on the locking latch (see
close-up) to disengage the LSD module (1).
Ê From inside the HDD extension box, press out on the LSD module and pull
it out of its bay (2).