TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 399
Fans
Figure 251: Removing a rear fan module (B)
Ê Before replacing the rear fan holder, remove the second rear fan module
accordingly.
8.3.2.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the side / top cover as described in section "Mounting the top cover"
on page 115 (rack server) or "Mounting the side cover" on page 122 (tower
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page 132.
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 130.
To Next Page
Loading...
