440 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Expansion cards and backup units
9.3.1.5 Installing the Modular LAN controller
Ê Remove the Modular LAN controller from its protective packaging.
I For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the enclosed full height slot bracket to the Modular LAN
controller as described in section "Preparing the Modular LAN controller" on
page 435.
Figure 277: Installing the Modular LAN controller
Ê Carefully insert the Modular LAN controller into PCI slot 1 and press down
firmly until it is fully seated in the slot.
To Next Page
Loading...
