276 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
Figure 157: Closing the 3.5-inch HDD module locking lever
Ê Fold down the lever to lock the HDD module in place.
7.3.6.5 Concluding steps
Perform the following procedures to complete the task:
Ê When working on a tower server, close the HDD bay cover as described in
section "Installing accessible drive and HDD bay covers" on page 119.
Ê Please observe the notes on RAID rebuild in section "Performing a RAID
array rebuild" on page 166.
To Next Page
Loading...
