852 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
System board and components
Ê Open the side / top cover as described in section "Removing the top cover"
on page 79 (rack server) or "Removing the side cover" on page 88 (tower
server).
Ê Remove the air duct as described in section "Removing the system air duct"
on page 100.
14.4.2.3 Removing onboard SAS enabling key
Figure 591: Onboard SAS enabling key mounting location
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.
To Next Page
Loading...
