Fujitsu PRIMERGY TX300 S7 - Removing the 8 X 2.5-Inch HDD Front Panel

244 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
7.2.9.3 Removing the 8x 2.5-inch HDD front panel
Figure 125: Removing the 8x 2.5-inch HDD front panel
Ê Remove four screws from the 8x 2.5-inch HDD front panel.
Ê Pull up on the 8x 2.5-inch HDD front panel to disengage it from the chassis.
Ê Remove the 8x 2.5-inch HDD front panel.