TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 33
Version history
Issue number Reason for update
0.5 / February 2012 Preliminary draft version
1.0 / March 2012 Initial release
1.1 / March 2012 Updated and revised release
1.2 / May 2012
Revised the following sections: GPGPU mounting
sequence, Chassis ID Prom Tool download
description, Applying thermal paste
1.3 / July 2012
Revised / complemented the following sections:
"Handling the system air duct", "Expansion card
overview", "Mounting order for accessible drives",
"Installing mounting brackets to RDX and DAT72
backup drives"
1.4 / August 2012
Additional power cabling solution for 4x 3.5-inch HDD
expansion boxes, additional entry in expansion card
slot priority table, differentiation of expansion card
fixation methods
1.5 / September 2012
Revised / added initial notes in sections "Preparing
PCI slot openings" and "Installing mounting brackets
to RDX and DAT72 backup drives", revised "High
safety use" paragraph in section "Before reading this
manual", added notes on fan test in chapter "Fans"
1.6 / November 2012
Added cabling information on USB 3.0 RDX drives,
added fan test procedure
1.7 / March 2013
Added new section on GPGPU cards with passive
cooling
1.8 / April 2013
Revised cabling plans / instructions, additions to the
expansion card slot priority table
To Next Page
Loading...
