476 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Expansion cards and backup units
9.4.2.3 Removing a GPGPU card
Figure 301: Detaching a GPGPU card (A)
Ê Disconnect the GPGPU power cable from the GPGPU card (1).
I If the cables are no longer used, either disconnect them from the
power backplane as described in section "Removing the power
backplane" on page 189 or secure them on the chassis wall with
adhesive tape.
Ê Remove the screws securing the GPGPU card from the mounting bracket
(2) and slot bracket (3).
I For easier access to the securing screw, remove the system fan
holder first (see section "Removing the system fan holder" on
page 389).
To Next Page
Loading...
