TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 767
Front panel and external connectors
13.1.3.3 Removing cables from the front panel module
Figure 534: Removing the front panel cable
Ê Remove the front panel cable from the defective front panel module as
shown.
Ê If the front LAN connector has been installed in the defective front panel
module, remove the cable as described in section "Removing the front LAN
connector" on page 790.
Ê If the front VGA connector has been installed in the defective front panel
module, remove the cable as described in section "Removing the front VGA
connector" on page 806.
To Next Page
Loading...
