Fujitsu PRIMERGY TX300 S7 - Installing the 16 X 2.5-Inch HDD Front Panel

254 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
Figure 135: Installing the intrusion switch holder (B)
Ê Secure the intrusion switch holder on the HDD bay top cover with one
M3 x 4.5 mm screw.
7.2.9.7 Installing the 16x 2.5-inch HDD front panel
Figure 136: 16x 2.5-inch HDD front panel (C26361-K644-B930)