EasyManua.ls Logo

Fujitsu PRIMERGY TX300 S7 - Cabling the Accessible Drive; Sata Odd

Fujitsu PRIMERGY TX300 S7
962 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 667
Accessible drives
12.2.5 Cabling the accessible drive
I The cabling list number and cabling plan sections in the allocation tables
below refer to chapter "Cabling" on page 909.
12.2.5.1 SATA ODD
3.5-inch HDD configurations
2.5-inch HDD configurations (4 SAS backplanes, up to 8 HDDs)
2.5-inch HDD configurations (6/8 SAS backplanes, up to 16/24 HDDs)
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan
SATA cable
Y3958-V205
20 ODD
System board
connector SATA 1
16.2.1
SATA power cable
Y3930-V601
6
ODD
(15-pin SATA)
3.5-inch HDD
backplane 1
connector X9
(4-pin connector)
16.2.3
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan
SATA cable
Y3958-V205
20 ODD
System board
connector SATA 1
16.2.1
SATA power cable
Y3930-V601
6
ODD
(15-pin SATA)
2.5-inch HDD
backplane 1
connector X9
(4-pin connector)
16.2.13
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan
SATA cable
Y3958-V205
20 ODD
System board
connector SATA 1
16.2.1
SATA power cable
Y3930-V601
6
ODD
(15-pin SATA)
2.5-inch HDD
backplane 3
connector X9
(4-pin connector)
16.2.14

Table of Contents

Other manuals for Fujitsu PRIMERGY TX300 S7

Related product manuals