428 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Expansion cards and backup units
Figure 269: Installing a PCI slot bracket (B)
Ê Insert (1) and close the PCI slot bracket locking bar (2) until the latch locks
in place (see close-up).
9.2.2.5 Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the air duct as described in section "Installing the system air duct"
on page 102.
Ê Close the side / top cover as described in section "Mounting the top cover"
on page 115 (rack server) or "Mounting the side cover" on page 122 (tower
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page 132.
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 130.
To Next Page
Loading...
