EasyManua.ls Logo

Fujitsu PRIMERGY TX300 S7 - Installing the Rear Fan Holder

Fujitsu PRIMERGY TX300 S7
962 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 405
Fans
8.3.4.4 Installing the rear fan holder
Figure 254: Mounting the rear fan holder (A)
Ê Lower the rear fan holder into the chassis.
Ê Fit the four hooks on the rear fan holder into the keyhole slots in the chassis.
Ê Press down on the rear fan holder until the four hooks lock in the narrow
ends of the keyhole slots (see close-up).

Table of Contents

Other manuals for Fujitsu PRIMERGY TX300 S7

Related product manuals