64 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Basic hardware procedures
4.1.1 Locating the defective server
Figure 2: ID button and ID indicator on front panel
Figure 3: ID indicator on connector panel
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
Ê Press the ID button on the front panel (1) or use the ServerView Operation
Manager user interface to switch on the system ID indicator LEDs (2).
I For further information, refer to the "ServerView Suite Local Service
Concept (LSC)" manual available from the ServerView Suite DVD 2
supplied with your PRIMERGY server or online at
http://manuals.ts.fujitsu.com (EMEA market) or
http://jp.fujitsu.com/platform/server/primergy/manual/(Japanese
market).
Ê When using ServerView Operations Manager to toggle the ID indicator,
choose Single System View and press the Locate button.
Ê Remember to switch off the ID indicator after the maintenance task has been
concluded successfully.
To Next Page
Loading...
