220 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
In order to permanently remove an operational HDD module that is part of a
RAID array from the server, you first need to delete the array using
ServerView RAID Manager.
V CAUTION!
All data on all HDDs / SSDs in the array will be lost! Be sure to back
up your data before deleting a RAID array.
For further information, please refer to the "ServerView Suite RAID
Management" user guide, available online at http://manuals.ts.fujitsu.com
(http://jp.fujitsu.com/platform/server/primergy/manual/ for the Japanese
market) or from the ServerView Suite DVD 2 supplied with your PRIMERGY
server.
Ê When working on a tower server, open the HDD bay cover as described in
section "Removing accessible drive and HDD bay covers" on page 91.
7.2.6.3 Removing a 2.5-inch HDD / SSD module
Figure 106: Disconnecting a 2.5-inch HDD / SSD module
To Next Page
Loading...
