Fujitsu PRIMERGY TX300 S7 - Installing the 4 X 3.5-Inch HDD Extension Box

334 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
7.4.5.5 Installing the 4x 3.5-inch HDD extension box
Figure 206: Checking mounting bracket positions
Ê Using a screw driver, bend the mounting brackets of the top and middle
installation bays outwards:
Ê Bend up the upper four mounting brackets (see blue arrows).
Ê Bend down the lower four mounting brackets (see orange arrows).