370 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
Figure 231: Installing SAS expander board spacer bolts (B)
Ê Screw the four SAS expander board spacer bolts onto the mounting bolts as
shown:
Ê Reinstall the system board carrier as described in section "Installing the
system board carrier" on page 109.
Ê Reinstall the system board as described in section "Installing the system
board" on page 863.
A Spacer bolts with shoulder screw caps
B Spacer bolt with screw thread
To Next Page
Loading...
