TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 459
Expansion cards and backup units
Figure 287: Connecting GPGPU power cables to the power backplane
Ê Connect the GPGPU power cables to the power backplane:
Ê Mount the system board carrier as described in section "Installing the
system board carrier" on page 109.
V CAUTION!
Ensure not to trap or pinch any cables running through the cable exit
from the power backplane.
Ê Reinstall the system board as described in section "Installing the system
board" on page 863.
# Connector Cable
1X22
GPGPU card power cable T26139-Y3946-V701
2 X23
To Next Page
Loading...
