TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 467
Expansion cards and backup units
Figure 296: Securing the GPGPU card (A)
Ê Slide the GPGPU card mounting bracket towards the server rear until it
touches the GPU card (1).
Ê Secure the GPGPU card to the mounting bracket with one M3 x 4.5 mm
screw (2).
I For easier access to the securing screw, remove the system fan
holder first (see section "Removing the system fan holder" on
page 389).
Ê Secure the GPGPU card to the upper rear edge of the chassis with two
M3 x 4.5 mm screws (3).
To Next Page
Loading...
