Fujitsu PRIMERGY TX300 S7 - Page 653

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 653
Accessible drives
Mounting order for accessible drives
Figure 449: Accessible drive configurations
Order Accessible drive Drive bay Max. Occupied Interface
1
Optical disk drive
(full height)
Bay 1 1 1.6" x 5.25" SATA
1
LSD in Multibay
Bay 1 1 1.6" x 5.25"
I
2
C bus
Slimline ODD
in Multibay
SATA
2
Backup drive
LTO3 HH Ultrium
Bay 3
if occupied:
Bay 2 or 1
1 1.6" x 5.25" SAS
2
Backup drive
LTO4 HH IBM
Bay 3
if occupied:
Bay 2 or 1
1 1.6" x 5.25" SAS
2
Backup drive
LTO5 HH Ultrium
Bay 3
if occupied:
Bay 2 or 1
1 1.6" x 5.25" SAS
2
Backup drive
DDS Gen 6
Bay 3
if occupied:
Bay 2 or 1
2 1.6" x 5.25" USB 2.0
3
Backup drive
DDS Gen 5 / Gen 6
Bay 3
if occupied:
Bay 2 or 1
2 1.6" x 5.25" USB 2.0
Table 5: Accessible drive mounting sequence
5.25“ x 1.6“
8 x 2.5“ HDD
5.25“ x 1.6“
5.25“ x 1.6“
5.25“ x 1.6“
5.25“ x 1.6“
3.5“ LSD
5.25“ SL ODD
3.5“ HDD
3.5“ HDD
5.25“ SL ODD
3.5“ HDD
3.5“ HDD
3.5“ HDD
3.5“ HDD
Bay 1
Bay 2
Bay 3