TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 723
Accessible drives
Figure 507: Inserting the LSD module
Ê Insert the LSD module into its installation bay and push in until it locks in
place.
Ê Before inserting the 2x 3.5-inch HDD extension box into the chassis,
connect the LSD cable to the LSD module:
Cabling
list no.
1
1
The cabling list numbers refers to section "List of used cables" on page 909.
Cable
14
LSD cable
(T26139-Y3718-V301)
To Next Page
Loading...
