908 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Converting a tower server to a rack server
Ê Mount the server in the rack as described in section "Mounting the server in
the rack" on page 130.
Ê Reconnect all external cables.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section "Connecting the server to
the mains" on page 133.
Ê Update your server’s chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section "Using the Chassis ID
Prom Tool" on page 168.
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page 170".
To Next Page
Loading...
