Fujitsu PRIMERGY TX300 S7 - Page 939

TX300 S7 / RX350 S7 Upgrade and Maintenance Manual 939
Cabling
Figure 664: Connecting the intrusion switch cable
Ê Run the intrusion switch cable through the cable clamps (C) on the HDD
cage and the cable guide (G).
Ê Connect the intrusion switch cable to the system board:
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan
Intrusion switch cable
Y3922-V121
13
Intrusion switch
holder
System board
connector
INTRUSION
16.2.1