Fujitsu PRIMERGY TX300 S7 - Page 946

946 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Appendix
Pos. Component Reference
1
Optional rear fans
(fans 5-6)
"Replacing rear fan modules" on page 400
2 Expansion card slots 1-4 "Replacing expansion cards" on page 429
3
Memory modules
(channels E/F)
"Replacing memory modules" on
page 599
4
Processor 2 /
CPU heat sink
"Installing processors" on page 605
5
Expansion card slots 10
for SAS RAID cards
"Replacing expansion cards" on page 429
6
Memory modules
(channels C/D)
"Replacing memory modules" on
page 599
7 UFM board "Replacing the UFM board" on page 827
8 System fans (fans 1-4)
"Replacing system fan modules" on
page 382
9
Battery backup units /
Flash backup units
"Replacing a BBU" on page 565
"Replacing an FBU" on page 570
10 HDD / SSD drive bays
"Hard disk drives / solid state drives" on
page 197
11 Intrusion switches
12 Front panel module bay
"Replacing the front panel module" on
page 760
13 Accessible drive bay "Accessible drives" on page 651
14 TPM board "Replacing the TPM board" on page 844
15 CMOS battery
"Replacing the CMOS battery" on
page 814
16
Memory modules
(channels A/B)
"Replacing memory modules" on
page 599
17
Processor 2 /
CPU heat sink
"Installing processors" on page 605
18
Memory modules
(channels G/H)
"Replacing memory modules" on
page 599
19
Expansion card slots 5-9
for GPGPU card
"Replacing a GPGPU card" on page 485