Fujitsu PRIMERGY TX300 S8 User Manual

TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 341
Fans
Ê Pull the locking lever (1) while slightly lifting up the rear fan holder (2).
Figure 231: Removing the rear fan holder (B)
Ê Lift up and disengage the rear fan holder.
Ê Ensure that the four hooks on the fan holder rest in the wide ends of the
keyhole slots on the server rear (see close-up).

Fujitsu PRIMERGY TX300 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX300 S8
Category	Server
Language	English