8.2.1.4 Concluding steps
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê Reconnect all external cables to the server rear.
Ê "Connecting the server to the mains" on page 118
Ê Switch on the server.
Ê "Performing a fan test after replacing a defective fan" on page 145
8.2.2 Replacing the system fan holder
8.2.2.1 Preliminary steps
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Ê "Removing the system air duct" on page 81
Upgrade and Repair Unit
(URU)
Average task duration:
5 minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General