Ê The TPM spacer is already present on the system board.
Ê Reinstall the TPM board as described in section "Installing the TPM board"
on page 661.
14.3.3.4 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task: "Resuming BitLocker functionality" on page 152
14.4 Onboard SAS enabling key
The onboard SAS enabling key needs to be installed in order to enable SAS
connector SAS 1-4 on the system board.
14.4.1 Installing the onboard SAS enabling key
14.4.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 125
Ê "Locating the defective server" on page 57
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63
Upgrade and Repair Unit
(URU)
Average task duration:
5 minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General