9.6.8.3 Installing the TFM module
Ê Install the new TFM module onto the existing TFM spacer bolts as described
in section "Installing a TFM module" on page 441.
9.6.8.4 Concluding steps
Ê Reinstall the SAS RAID controller as described in sections "Installing the
SAS RAID controller" on page 426 or "Installing expansion cards" on
page 349.
Ê Connect the SAS cables to their original connectors on the SAS RAID
controller.
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê If applicable, update the firmware of the RAID controller that has been
connected to the BBU as described in section "Updating RAID controller
firmware" on page 137.
Ê "Enabling SVOM boot watchdog functionality" on page 146
To Next Page
Loading...
Need help?
General