Two different processor heat sinks are available for the TX300 S8 / RX350 S8
servers:
11.5.2.1 Preparing the heat sink and processor
When installing a new heat sink
Figure 396: Removing the protective heat sink cover
Ê Remove the protective cover from the heat sink.
V CAUTION!
Ensure not to touch the thermal paste on the bottom of the heat sink.
High performance
heat sink
V26898-B977-V3
– Xeon E5-2643 V2 (Ivy Bridge)
3.5 GHz, 130 W, 6 Core
– Xeon E5-2637 V2 (Ivy Bridge)
3.5 GHz, 130 W, 4 Core
Standard heat sink V26898-B977-V1 all other approved CPUs
To Next Page
Loading...
Need help?
General